کار با toyrep 3d printer

Connecting...

start

Printer is now online.

echo:Marlin 1.1.0-RC5

echo: Last Updated: 2016-04-01 12:00 | Author: (none, default config)

Compiled: May 23 2016

echo: Free Memory: 5190  PlannerBufferBytes: 1232

echo:Hardcoded Default Settings Loaded

echo:Steps per unit:

echo:  M92 X657.38 Y657.06 Z20378.86 E7026.99

echo:Maximum feedrates (mm/s):

echo:  M203 X30.00 Y30.00 Z0.35 E4.17

echo:Maximum Acceleration (mm/s2):

echo:  M201 X500 Y500 Z5 E150

echo:Accelerations: P=printing, R=retract and T=travel

echo:  M204 P250.00 R150.00 T150.00

echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)

echo:  M205 S0.00 T0.00 B20000 X0.50 Z0.01 E0.10

echo:Home offset (mm):

echo:  M206 X0.00 Y0.00 Z0.00

echo:PID settings:

echo:  M301 P22.20 I1.08 D114.00 C100.00 L20